View Single Post
Old 04-20-2016, 12:09 AM   #10
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Engine removal with radiator in place

It can be done because I had a customer that wanted me to install his new engine but didn't want me to remove the hood rods and radiator, for fear of not getting the hood lined up again. I should have walked, but I did the job.

While the radiator is out you might as well turn it upside down and back flush it. I use a sump pump and large tub to back flush, because you need more flow than a garden hose can supply.
Tom Wesenberg is offline   Reply With Quote