Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Ronnie
Sounds like you are using an impact driver with a 1/4" hex drive. A cordless impact wrench is what uses the direct fit 3/8" or 1/2" square drive anvils with regular impact sockets. It appears you exceed the designed torque for the 1/4" adapter for sockets.Not really designed for heavy use. R
|
Good point Ronnie, I was thinking a heaver drive. For smaller nuts and bolts they sell sockets that have the hex drive as part of the socket. Should work fine for lighter work. I have driven lag screws with my driver.