Quote:
Originally Posted by Kevin in NJ
Ford was not big on wasting stuff.
It is likely the stuff that failed production specs got used someplace.
I would not be surprised if items that failed production specs got put out for replacement parts. It was ok for a mechanic to spend time fitting, but not the production worker.
My brother believes some of the stuff that people bought NOS laying the shelf for decades may have been on the shelf because it never fit.
|
I have thought this as well. Some NOS parts that I have bought off of E-Bay were dimensionally defective in some way. I recall a large E-Bay auction of parts salvaged from an old Ford dealership in which almost every box or tag was marked "NG" in grease pencil. I suspected that the letters meant "No Good".