The Ford Barn - View Single Post

rocket1 · 11-18-2019, 05:03 PM

Easy to make,it is a pipe plug 1/4 in. I believe,drill and tap down the center of plug and insert a screw so you can tighten it against the oil pump.

11-18-2019, 05:03 PM	#11
rocket1 Senior Member Join Date: Mar 2014 Location: Midland Park,N.J. Posts: 1,108	Re: pan install Easy to make,it is a pipe plug 1/4 in. I believe,drill and tap down the center of plug and insert a screw so you can tighten it against the oil pump.