View Single Post
Old 10-21-2020, 08:57 PM   #3
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,472
Default Re: 1930 Model A Gears Grind After New Clutch Install

If the gearbox is not properly supported in the time between the spline on the input shaft engaging the clutch plate and getting a few bolts in the bell housing, the clutch plate may be bent. If that has happened, it will drag when the pedal is depressed. That might be your problem. The only fix it to replace the bent clutch plate and don't do it again.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote