The Ford Barn - View Single Post

Steve Wastler · 08-14-2011, 08:47 AM

The fittings are a press fit, hex sided (if original), if this is on a 28-30 e brake . I usually put a wrench on the fitting get it to turn some and pop it off, a little help with a screwdriver can help. Brattons sells them under grease fittings in the catalog.

08-14-2011, 08:47 AM	#2
Steve Wastler Senior Member Join Date: May 2010 Posts: 1,987	Re: e break cross shaft grease fitting The fittings are a press fit, hex sided (if original), if this is on a 28-30 e brake . I usually put a wrench on the fitting get it to turn some and pop it off, a little help with a screwdriver can help. Brattons sells them under grease fittings in the catalog.