View Single Post
Old 07-06-2020, 05:42 PM   #1
Senior Member
Conaway2's Avatar
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 245
Default Rear spring spreader

Has anyone used the Ecklers spring spreader ??

Years ago, I used a homemade one with2 pieces of galvanized pipe and threaded stock in the middle with nuts and washers. It worked, but was tricky to use because the threaded stock had to bend over the banjo. Not sure I want to do that again.

Thanks - Jim
Conaway2 is offline   Reply With Quote