Thread: Spark Question
View Single Post
Old 07-06-2020, 01:53 PM   #19
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,787
Default Re: Spark Question

OK. Take the coil secondary high tension lead out of the cap and place it 1/4" from a good ground. Remove distributor cap so you have access to points. Have points closed and put a piece of paper between the contacts. Turn on key. Take your finger or something plastic/wooden and open points. Remove piece of paper. Close and open points several times and there should be a good spark from the wire to the ground every time.

Let us know what happens.

If there is no spark then its either a bad coil, condenser or coil wire.

If there is a spark then the problem should be a bad cap, rotor or sparklers. Another test is to have all sparklers out and connect one and have its ground electrode to a good ground. [big jumper wire works] Spin engine over with key on and there should be a spark. If not its one of those items.
Patrick L. is offline   Reply With Quote