Thread: Spark Question
View Single Post
Old 07-05-2020, 02:50 PM   #8
Jim/GA
Senior Member
 
Jim/GA's Avatar
 
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,565
Default Re: Spark Question

Quote:
Originally Posted by txmike View Post
ok, sorry to sound ignorant but does the timing pin slip in all the way when it hits the slot?
I have felt some movement on the pint but it will not go in and I thought in the past it did.

Cranking this thing is a pain (i am being nice) how many turns does it take to get it aligned?
No. It is a very subtle dimple that the pin drops down into. Very easy to miss.

If you miss the dimple during one pass, the engine crankshaft needs to make 2 full turns to get back to where you were. 1-3/4 turns will get you "approaching" the dimple. It is at this point you need to slow down the cranking.

Remove spark plug #1. This makes it easier to crank that piston up to the top as the dimple approaches. Go slow that last 1/4 turn.

HTH.

__________________
Jim Cannon
"Have a Model A day!"

Attention: MAFCA Members
* It's time to VOTE for your National Directors

* Please find your 2 ballots in your membership renewal materials that were just sent out

* Vote for Jim Cannon (me!)

* Return both ballots to MAFCA

* Thank you for your support!
Jim/GA is offline   Reply With Quote