View Single Post
Old 07-03-2020, 09:38 AM   #6
fred93
Senior Member
 
fred93's Avatar
 
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 420
Default Re: 29 Tudor side mounted tire question

Quote:
Originally Posted by BRENT in 10-uh-C View Post
Actually, most reproduction wells that have been installed after the fender left the factory are installed incorrectly. When the well is installed correctly, the tire just touches the bottom of the well and does NOT touch the sides of the well. I don't have time to make another drawing but here is one from a 30/31 fender that shows how the shape is supposed to be.

The side-mount arm is different on the 28/29 and the plates from L to R are different. The two studs should be flat across the top and the valve stem is at the 12:00 position.


.
.
************************************************** *

Thanks Brent

I assume that I have placed the mounting plate in the proper position?
Attached Images
File Type: jpg IMG_6860.jpg (53.6 KB, 12 views)
__________________
Why is there never enough time to do it right, but always enough time to do it over!!!
fred93 is offline   Reply With Quote