View Single Post
Old 06-30-2020, 10:59 AM   #9
fred93
Senior Member
 
fred93's Avatar
 
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 420
Default Re: 29 Tudor electric wiper

Quote:
Originally Posted by Vin-tin View Post
Fred, did you test it on the bench or in the car? The reason I ask is because I don't see the copper "ground" strap that should be fastened under that one screw. The other end goes between the rubber boot and the windshield frame.
***************************************

Thanks for the reply--

Yes, I did install the copper ground strap (sorry that I don't have a photo of that) and I did grind the paint off at the area where the strap contacts the windshield frame. I checked for ground continuity and power voltage the other day when I noticed that the wiper was not working. However, I will connect a temporary ground wire to the wiper just to make sure.
__________________
Why is there never enough time to do it right, but always enough time to do it over!!!
fred93 is offline   Reply With Quote