Thread: Timing Help
View Single Post
Old 06-24-2020, 12:26 PM   #6
ryanheacox
Senior Member
 
ryanheacox's Avatar
 
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,009
Default Re: Timing Help

Another thought, did you bend the terminal on the wire from the lower plate to the points at a 90 degree angle? I didn't at first when I did mine and would only start with the spark down because otherwise the terminal was grounding against the spring between the plates. Hard to start with no spark, imagine that!
ryanheacox is offline   Reply With Quote