Quote:
Originally Posted by Mulletwagon
If king pin bushings are a little loose, now would be a great time to change them out and be done with it. Since the stop bolt has to be pulled it is a simple matter to pull the king pins up. Just went through bushing drill and discovered my king pins were also worn. Got the king pin/bushing set from Snyder's and it fit perfect - zero play afterward. Bad news is you will need a reamer to finish cut the bushings.
|
I haven't found a reamer that will go through both bushings so I take mine to a machine shop to have honed and get a much better fit.
John