The Ford Barn - View Single Post

V8 Bob · 08-31-2017, 01:12 PM

The NAPA 111 stat may work great on early V8s, but is too small in diameter at 1.882" to work on late flatheads, were a diameter of 2.062" is about the minimum. A 170 stat is what I would like to run, but haven't found any to date.

08-31-2017, 01:12 PM	#21
V8 Bob Senior Member Join Date: May 2010 Location: Granger (Northern) Indiana Posts: 1,521	Re: thermostats The NAPA 111 stat may work great on early V8s, but is too small in diameter at 1.882" to work on late flatheads, were a diameter of 2.062" is about the minimum. A 170 stat is what I would like to run, but haven't found any to date.