View Single Post
Old 08-06-2015, 08:33 PM   #2
oneoldtruckguy
Member
 
Join Date: Mar 2014
Location: Bozeman, Montana
Posts: 56
Default Re: 29 Business coupe oval windows

I owned a 29 oval window business coupe about 35 years ago and I restored it. I don't remember close to everything but I do remember this. the inside and the out window frames are screwed to each other from the inside out. I remember putting the inside frame with screws and glass on the inside facing the outside and punching small holes thru the top material where each of the screw holes are and will line up with outside frame. I remember then putting the screws thru the inside frame, thru the top material and then into the outside frame tightening the screws one at a time just a little at a time going around the frame until tight. Then cutting the material out of each frame and not scratching the glass. I don't remember using any sealant and don't remember it leaking. Hope this helps a little and maybe someone that has done more recently has a better idea.
oneoldtruckguy is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)