The Ford Barn - View Single Post

Big hammer · 09-12-2020, 08:23 AM

Sponsored Links (Register now to hide all advertisements)

I used 2x12 for sides and front rear vertical 2x2 in the corners, 3/4 4x6 plywood on top of the frame, 8 in casters, triangle 3/4 plywood in the corners. The flat top was great work space, body screwed down to the top, I could sit inside and work. When I needed to haul the body, I could roll it up some 8ft ramps into a 8ft bed in my truck. Have fun !

09-12-2020, 08:23 AM	#6
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: Body Cart for Tudor Body Sponsored Links (Register now to hide all advertisements) I used 2x12 for sides and front rear vertical 2x2 in the corners, 3/4 4x6 plywood on top of the frame, 8 in casters, triangle 3/4 plywood in the corners. The flat top was great work space, body screwed down to the top, I could sit inside and work. When I needed to haul the body, I could roll it up some 8ft ramps into a 8ft bed in my truck. Have fun ! __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done