Re: Inner distributor caps
Guys,
I spoke at length to Jim Linder. I hope I'm quoting him close to correct.......
If the test light lights you are golden...........however.........no sweat if you get even
20 ohms........there is plenty of volts to cover even that much. My real comfy com-
fort level is to get a light with my cheesey continuity light but I'm not going to worry about 2 or 3 ohms.
Did I get that correct Jim ?
Charlie ny
Last edited by Charlie ny; 08-04-2017 at 04:32 PM.
Reason: added not after I'm
|