The Ford Barn - View Single Post

Kajtek1 · 02-25-2021, 08:19 PM

Took it for couple loops around the block and it drives good.
I think I have bend wheel as it was wobbling, but I don't plan to drive it on freeways.
Ignition switch has bad contact on magneto side.
Lights work, but when ammeter shows discharge with lights, it is not showing charge. In tool box I found old VR in box labeled "electronic VR" so looks like PO was dealing with it before.
Ceramic coat on paint and 303 on tires and softtop.
Sure turned few heads and had cameras flashing.

02-25-2021, 08:19 PM	#40
Kajtek1 Member Join Date: Feb 2021 Location: VEGAS Posts: 86	Re: New member with "new" 1922 Model T Took it for couple loops around the block and it drives good. I think I have bend wheel as it was wobbling, but I don't plan to drive it on freeways. Ignition switch has bad contact on magneto side. Lights work, but when ammeter shows discharge with lights, it is not showing charge. In tool box I found old VR in box labeled "electronic VR" so looks like PO was dealing with it before. Ceramic coat on paint and 303 on tires and softtop. Sure turned few heads and had cameras flashing.