Re: Dumb Question About Nut/Bolt Diameters
Quote:
Originally Posted by ericr
can any machinist, or any informed person, tell me if the nuts/bolts for a specific size are actually small/larger than their stated size? for example a 5/8 nut on a 5/8 bolt would not fit together because they are of equal size. obviously there is some variation but is on the nut or the bolt?
|
Are you asking about the fitting of the nut to bolt, I believe this is called thread class, like the close fitting bolts in the rearend as compared to a hardware store bolt.
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
|