Re: Having trouble installing spark plug wires into caps
Quote:
Originally Posted by drolston
If you can get all wires through the looms, it is pretty sure, you are using 7mm spark plug wire, and not 9mm. No offense; just thinking out loud.
|
I'm not all that concerned with wire size, I'm interested in installation and getting this project finished. Wires are through the looms w/o any problem. The problem is getting the caps on with the wires attached. I'm getting very close, but older as well. No offense.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes.
It is better to be seen, than viewed.
"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".
Last edited by Lawson Cox; 05-23-2022 at 09:28 PM.
|