Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Terry,OH
Near the bottom of the horn rod there is a recess in the recess is a C-clip. The C-clip holds the light switch spider and spring in place. The C-clip has to be removed usually by compressing the spring a little. All the parts have modern replacements, except the rod itself. At the very end of the rod is a plastic insulating insert be careful not to damage the plastic. Once the C-clip is removed the spider and spring will slide off the horn rod.
|
OK, that makes sence. Thank you.
Do I need someone at the steering wheel to keep the light control tight against the steering wheel while I push the light switch spider back to expose the C-clip? Will I then be able to remove the C-clip with needle nose pliers?