View Single Post
Old 07-22-2020, 07:32 PM   #1
Will D
Senior Member
 
Will D's Avatar
 
Join Date: Feb 2020
Location: BC Canada
Posts: 573
Default No more gallivanting - temp question

Long story short, after suffering with random cyl 4 misfire, extensive troubleshooting and finally a leak test, my exhaust valves in cyl 4 on my daily driver are hooped. Now driving the pleasure craft to work till I figure out what I'm gonna do....

24 stud 59A, with recored radiator, temps usually run around 180. This morning it stayed at 180 but the ride home I was pushing 200 +/-. Outside temp was 86F, 35 mile trip on flat hwy going 55mph. Is that too hot or ok? I've also noticed on pleasure trips, doing a good hill climb or hitting 60-65 mph it creeps up to 200. Once on flat or dropping to 55mph it comes back to 180F. But today it stayed at 200F till I got home.

I have recently rebuild the distributor. Is this normal temp ranges or does my timing need to be advanced a little more or different issue?
Will D is offline   Reply With Quote