The Ford Barn - View Single Post

russcc · 11-22-2015, 07:06 AM

When we shortened the driveshaft for the '40 rear end into the '29 roadster, the driveshaft shop cut, took a section out the torque tube and driveshaft, and welded them in a lathe. Did not have to cut splines.

11-22-2015, 07:06 AM	#7
russcc Senior Member Join Date: May 2010 Posts: 2,871	Re: Resplining a solid driveshaft When we shortened the driveshaft for the '40 rear end into the '29 roadster, the driveshaft shop cut, took a section out the torque tube and driveshaft, and welded them in a lathe. Did not have to cut splines.