The Ford Barn - View Single Post

JSeery · 11-21-2015, 11:33 PM

I have never cut drive shaft splines, but I have cut axle splines. The axle splines end up like a "V" and use a 45 degree type cutter. I would guess cas3 has it right.

11-21-2015, 11:33 PM	#4
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Resplining a solid driveshaft I have never cut drive shaft splines, but I have cut axle splines. The axle splines end up like a "V" and use a 45 degree type cutter. I would guess cas3 has it right.