The Ford Barn - View Single Post

Lawson Cox · 12-08-2021, 02:09 PM

Does anyone have a stock 60HP engine in their 37-39 Ford? I need to know the correct length of the fan hub. Is it 2" or 4 1/8"? The Green Bible shows it 4 1/8" but I've seen two on OLD engines that are 2". The 37 60HP in the Early Ford V8 Museum I am told measures 2". I want to do this engine properly if it is going to the museum. Thanks guys.

12-08-2021, 02:09 PM	#1
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Correct fan hub length on 60HP Does anyone have a stock 60HP engine in their 37-39 Ford? I need to know the correct length of the fan hub. Is it 2" or 4 1/8"? The Green Bible shows it 4 1/8" but I've seen two on OLD engines that are 2". The 37 60HP in the Early Ford V8 Museum I am told measures 2". I want to do this engine properly if it is going to the museum. Thanks guys. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".