Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by rotorwrench
The original Ford part number was 26H-2006. That number indicates it started out on the post war Lincoln cars. My 1951 catalog indicates the number changed to a kit that included all the shoe hold down parts. It was part number 8M-22009 but they kept the basic part number reference for those cups through 1953 I believe.
Lincoln used Bendix type brakes before Ford & Mercury did so some of the parts continued with other Ford/Bendix designs including Ford pickups & trucks. They are listed as 25/32 inch OD.
C&G has a brake shoe hold down kit P/N B2A-2068-K that would likely work. The length of the pins would be the only question but the 2 1/64" pins were the same part number between pickups and Mercury cars. Hell, the F1 had the same rear axle as the Mercury cars with exception to the spring mounts.
|
Thanks, another question how about the brake cylinder link pins between the cylinder and shoes? I have Ford part number 2042 but can't find a match.
Any help?