Quote:
Originally Posted by Glyn Farrell
Hi all, especially Pete.
I hope this forum is still open.
Pete if you occasionally read this thread, I'd really like to know the Spicer part numbers.
All I get here in Australia are blank looks from the Dana Spicer official agents.
Your T5 to T Tube looks fantastic.
I'd like to try.
Regards
Glyn
|
Hi Glyn,
All I can suggest on finding the yokes is to contact a Spicer dealer in the USA and give them the exact dimensions of the spline shafts you want to match up to. They have catalogs with engineering dimensions in them.
Finding the end for the transmission should be no problem.
The rear yoke could be the same by adapting the proper spline stub to the driveline.
That may be the most practical way.