The Ford Barn - View Single Post

rockfla · 12-21-2020, 08:02 AM

The frame was bent on our 35 German Ford, we were lucky enough to have a 20' long 12" wide 1/4" thick Aluminum I-Beam that we were able to slide the length of the frame rail and chained it around the frame rail hanging the length of the frame.....Then we used a 20 ton bottle jack between the I-Beam and frame rail and jacked it were we needed!!!!!

12-21-2020, 08:02 AM	#15
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 3,953	Re: Bent chassis The frame was bent on our 35 German Ford, we were lucky enough to have a 20' long 12" wide 1/4" thick Aluminum I-Beam that we were able to slide the length of the frame rail and chained it around the frame rail hanging the length of the frame.....Then we used a 20 ton bottle jack between the I-Beam and frame rail and jacked it were we needed!!!!!