Quote:
Originally Posted by shew01
https://www.amazon.com/Valco-Cincinn...1811297&sr=8-3
“Allows metal-to-metal contact and is resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants. Dresses gaskets, threads and seals gaps up to 0.25mm.”
Sent from my iPhone using Tapatalk
|
Quote:
Originally Posted by Jim/GA
I use Hylomar AF. The original Hylomar Blue would work.
This jet sealing surface is not submerged in gasoline all the time.
|
Thanks, but I see it
resists gasoline but is not gasoline
proof.
The reason I asked is I have a Marvel Shebler carby that insists on weeping out the gasket between the upper and lower sections. Thought I might try some sort of sealer, but I don't think a gas resistant sealer would do the job. The gasket surfaces are flat now after I filed them but were warped before.
Thanks.