Thread: Cannot get the quail back on
View Single Post
Old 07-16-2019, 12:13 PM   #7
Jacksonlll
Senior Member
 
Jacksonlll's Avatar
 
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,686
Send a message via ICQ to Jacksonlll
Default Re: Cannot get the quail back on
It ollks like yourscrews are going in from the bottom. They should go in from the top. Put the screws in loose. Rotate the tabs. Hold them from turning, then tighten them. Good luck.
Jacksonlll is offline   Reply With Quote