07-15-2019, 08:44 PM
|
#3
|
|
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: Cannot get the quail back on
Quote:
Originally Posted by Magicbox51
On mine, I just have to fiddle with it until it goes. You are usually pressing against the rubber O-ring and if it is a good O-ring, it needs some hand pressure to get it compressed enough to go under the catches that hold it shut.
PS: If you are talking about where it connects to the radiator filler neck, my 1929 has an Allen wrench set screw holding it to the neck. Don't forget that.
|
I cannot attach the "locking" thermo quail to the radiator !!! I took it off by removing the allen wrench screws; it came off easy. I would have thought it just twists on then you attach and tighten the screws but I cannot do that...what am I missing? Does it attach with the screws fitted or without?
|
|
|