03-26-2021, 04:59 PM
|
#20
|
|
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Timing Pin Dimple is not TDC?
Quote:
Originally Posted by GeneBob
NuREx sells a kit for this. You would need to go through the aggravation once then have the marker from that point onward.
BTW, good catch on checking your TDC did not line up.
|
The Nu-Rex timing marks work very well and makes it easy to check your timing. I use a light to check my timing and auto advance.
Quote:
Originally Posted by 40-A Twins
My Diamond motor timing cover is drilled for A configuration, and I just confirmed TDC when the pin is in the dimple.
Kevin
|
Good picture of the timing cover with the elongated boss. Michael should be able to see what we are referring to with your picture.
Last edited by Y-Blockhead; 03-26-2021 at 05:10 PM.
|
|
|