The Ford Barn - View Single Post

4tford · 01-23-2014, 12:49 PM

I never use the wrenches. I have two foot long drill bits one is 1/8" and the other 3/16. I find it quicker to drill small hole then larger. I use a cut off 3/16" punch to hold the lifter. I normally have to rotate the crank on each setting but that is fine as it keeps me in shape I use a dial indicator to show me full open then rotate crank one turn.

01-23-2014, 12:49 PM	#5
4tford Senior Member Join Date: May 2010 Location: Regina Canada Posts: 1,335	Re: some advice for adjusting valves I never use the wrenches. I have two foot long drill bits one is 1/8" and the other 3/16. I find it quicker to drill small hole then larger. I use a cut off 3/16" punch to hold the lifter. I normally have to rotate the crank on each setting but that is fine as it keeps me in shape I use a dial indicator to show me full open then rotate crank one turn.