Re: Door Window replacment
Appreciate all the feedback, best results was with the hammer, evidently the prior owner was of the mindset if it works do it, the windows appear to be set in the channel with a combination of Ductape and silicone, not pretty
And this leads to another issue, mismatched regulators, see below, plus one window channel is 21 1/4" with a roller groove of 6 1/2" other is 22 1/2" with groove at 8 3/4"
Hardware is in pretty good shape, didn't intend to replace, but wondering which is the correct regulator and also if the glass I'm using as a template is correct, it measure 25" x15"
|