View Single Post
Old 09-01-2020, 11:40 PM   #4
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Posts: 7,127
Default Re: '32 BB rear engine mounts

Unless it is a super-early BB, each steady rod would have three holes in the center cross member for it if it were there originally. One about 7/8" diameter book-ended by two for 5/16" bolts to attach it to the cross member (it passes through the cross member and is installed through the rear of the cross member).
DavidG is offline   Reply With Quote