The Ford Barn - View Single Post - Fuel pump - Y-block

zuburg · 04-17-2021, 11:02 AM

Since I’m having trouble starting a newly rebuilt 292 (and I don’t details of all the mechanics), I wanted to confirm I attached the two vacuum lines to the right nipples on the top of the fuel pump.

The new pump has the nipple closest to the timing cover labeled IN and the other one OUT. The original pump also had the word Wiper between the two nipples and an arrow pointing to IN. I assume this means the line going to the hose that goes through the firewall to the wiper should be connected to the IN nipple? And the out nipple should be attached to the block on the bottom rear of the carb. Please confirm.

Thanks

04-17-2021, 11:02 AM	#1
zuburg Senior Member Join Date: Jun 2015 Location: Raleigh, NC Posts: 332	Fuel pump - Y-block - which lines go where Since I’m having trouble starting a newly rebuilt 292 (and I don’t details of all the mechanics), I wanted to confirm I attached the two vacuum lines to the right nipples on the top of the fuel pump. The new pump has the nipple closest to the timing cover labeled IN and the other one OUT. The original pump also had the word Wiper between the two nipples and an arrow pointing to IN. I assume this means the line going to the hose that goes through the firewall to the wiper should be connected to the IN nipple? And the out nipple should be attached to the block on the bottom rear of the carb. Please confirm. Thanks