The Ford Barn - View Single Post

JayChicago · 04-10-2021, 01:25 PM

I think readings on both coils are what they should be.

Skip's coil needs the ignition resistor back in the circuit. Will add about .5 ohm for total of about 1.5 ohm. Your can coil is about 1.5 ohm without the resistor.

04-10-2021, 01:25 PM	#3
JayChicago Senior Member Join Date: Jan 2019 Location: Chicago Posts: 732	Re: Coil readings what it it telling me I think readings on both coils are what they should be. Skip's coil needs the ignition resistor back in the circuit. Will add about .5 ohm for total of about 1.5 ohm. Your can coil is about 1.5 ohm without the resistor.