Re: Hole in front of Engine block
You may be able to have someone weld it up while it is in the car. Have them use a nickle rod and hammer on the weld with a ballpeen hammer to put the weld in compression. Normally the cast iron is heated before welding but if you hammer on the weld that is not necessary. Everything must be clean before welding. No paint, no rust, no grease, no nothing.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|