View Single Post
Old 06-10-2021, 07:02 AM   #7
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,903
Default Re: Ignition switch question

The armored cable may have stopped some thief in 1930 but today a determined thief is just going to put the car on a flatbed and drive away.

In my car, I have the modern switch and it is wired like a modern car. I have an accessory position which allows me to work on things like the windshield wiper or to program the GPS without having the ignition on. I should note that I have added a distribution block with fuses for the various things, like a modern car. It is mounted with magnets so no new holes were added to the firewall.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote