Re: Ignition switch question
The original pop out ignition switch was wired that way. A lot of people wire it differently when moving to a modern switch so that the current flows from the ignition switch to the coil and then to the points. That way the coil is dead when the ignition is off.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|