06-29-2020, 10:59 PM
|
#17
|
Senior Member
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
|
Re: Manifold/Muffler Joint
Quote:
Originally Posted by JoeCB
This may be unorthodox but has worked fine for me for many years... wrap a 3/4 " wide band of 4 or 5 folded layers of aluminum foil around the joint. install the clamp over this band and tighten. Of course first ensure a good fit of the pipe flange to the manifold. Never had leaks and the foil stays put and is invisible.
Joe B
|
Ditto on that
|
|
|