Quote:
Originally Posted by KULTULZ
OH! If you could when you get the manifold, if you could take an overhead shot w/ the CASTING ID and post it here I would appreciate it.
|
Here's a pic from the evil bay ad. The actual numbers on the casting are a slightly smaller size than what's on the original on my car, I think. And in a slightly different location. The other extraneous numbers aren't the same, but I figure that they're some sort of production numbering system. The seller says the paint/coating will burn off. Also, he sells a lot of FE exhaust manifolds on ebay, but noted that that this particular casting number is difficult to find. So I lucked out...but I'm still crossing my fingers that everything will be as needed when it arrives. Here's the pic :