The Ford Barn - View Single Post - 1961 FE exaust manifolds and casting numbers.

estout81 · 01-20-2021, 05:11 PM

The head should be resurfaced. You might get away with using a large flat file to clean the head surface, but, the head must be flat and clean. Do NOT use a gasket between head and manifold.

01-20-2021, 05:11 PM	#10
estout81 BANNED Join Date: Jun 2010 Location: Utica, Ohio Posts: 522	Re: 1961 FE exaust manifolds and casting numbers. The head should be resurfaced. You might get away with using a large flat file to clean the head surface, but, the head must be flat and clean. Do NOT use a gasket between head and manifold.