Re: Screw dropped into radiator
I had success with a similar predicament with a modern car buy attaching a 1/2" diameter hose to the end of my shop vac. Stuck the hose in and managed to get the small part sucked out. The nut or washer wasn't going to cause a problem if it stayed in the radiator, but it bugged me enough to give the vacuum cleaner a try after I failed with a magnet.
__________________
1935 157" 1 1/2 ton stake truck undergoing full original restoration
1936 131 1/2" panel truck rescue preservation
Author of the 1935-1936 Ford Model 51 V8 Truck book published by the Early Ford V8 Club of America
|