Re: Jump Starting?
Jeff
On your trip to Maine this summer did you see the truck pull over to the flathead race car white coupe.He plugged into front of truck and jumped started to car.
If you had a quick disconnect and mount on inner fender well.
Pos to ground on frame,
Next Neg to same kind of solinode thats on your car,and other side to starter.
Now small wire on #2 sel to push botton on dash( if you have a one wire botton need same as car)
Now you can carry 6 volt battery to front fender mounted plug/or put battery in trunk.hookup."No need to go under seat"
Now get in car turn key on and press #2 starter botton.
Now if still no start press both bottons same time.
Its the same as jumping +TO+, Neg to neg. Correctly wired to batt.
This is the safest way.
Most batt cables don,t make good contact with only 6 or more points
|