View Single Post
Old 07-29-2020, 02:41 AM   #60
frnkeore
Senior Member
 
frnkeore's Avatar
 
Join Date: Jul 2019
Location: Southern Oregon
Posts: 518
Default Re: Let's build a drag race 8BA engine

Added:
I don't know how after market piston manufacturer's measure CH (I'm to cheap to order a set) but, Ford measures to the corner of the dome, above the top ring, not to the top of the dome. That corner, also has to be more than .036 from the head surface so, make sure you know what that measurement is. Std CH is 1.530, as I remember.
__________________
Frank
'35 Ford Model 51
'48 Ford F3
frnkeore is offline   Reply With Quote