Thread: Windage Tray
View Single Post
Old 07-27-2020, 09:29 PM   #17
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 3,888
Default Re: Windage Tray

Quote:
Originally Posted by speedbug78 View Post
I have been thinking about this too. With a vacuum pump do you recommend a scraper too? I thought at some point it begins starving the wrist pins?
Yes on the scraper.
The pistons and rods need to be modified for dry sump or vacuum pump.
The oiling system in an all out engine is not an "add one piece at a time" thing.
There are things that are done different even when the amount of vacuum is above or below certain limits.
The keen thing about all of this is, it can free up about 40 hp. no matter what fuel you are using.
Pete is offline   Reply With Quote