View Single Post
Old 07-20-2020, 11:34 AM   #5
WHN
Senior Member
 
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,177
Default Re: Frame to front and rear end alignment

Similar problem when we put front end back together after rebuilding.

We were using a different wishbone. The original one was worn and bent where it mounted to front axel on drivers side.

Well problem was axel also had a very slight bend. Most likely car was hit years ago on drivers side front wheel.

Fixed axel problem, everything fit fine.

Enjoy.
WHN is online now   Reply With Quote