Thread: Elec novice
View Single Post
Old 07-17-2020, 07:13 PM   #8
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 15,111
Default Re: Elec novice

Not running a fully charged battery should read in the 6.3 - 6.4 volt range and the B terminal on the voltage regulator should read the same as the battery minus any voltage loss in the wiring. Running (with the rpms up) the battery should be seeing 7+ volts, but this is somewhat dependent on the system load (light on, etc).
JSeery is online now   Reply With Quote