View Single Post
Old 07-09-2020, 04:49 PM   #5
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 840
Default Re: Electric fuel pump test ?

Quote:
Originally Posted by zoegrant View Post
Is it possible to test the pressure put out by my electric fuel pump ?
I would like to know how much fuel pressure I have at the carb.
I am not running a mechanical pump, just the electric one.




You sure can its easy to do using any type of low pressure gauge. To test the pressure output from the pump no need to add a Tee fitting. All you need to do is connect the fuel line thats on the carb directly to the pressure gauge. Once you turn the pump on you will see the pressure output on the gauge from the pump. Some electric pumps will shut down once the flow stops so the pressure reading will go down once that happens. Prior to that you will see the pressure reading on the gauge.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder and Driver of the First Ford Flathead bodied roadster to run 200 MPH Record run July 13, 2018 LTA timing association 200.921 from a standing start in one and a half miles burning gasoline.
Ronnieroadster is offline   Reply With Quote